A freshly sharpened pencil and its shavings on a wooden desk, with a small kitchen timer and a stack of ruled pads and notebooks soft behind, in cool morning light

These five physics practice problems each need a different principle: constant-acceleration kinematics, Newton’s second law on two connected objects, conservation of energy, conservation of momentum, and circular motion. Each one is worked from the knowns to a number with units, with the condition checked before the formula is used.

Five problems from the same chapter mostly practice the algebra. Five problems that need five different principles practice the step that decides the answer, which is choosing the principle. That choice is what a test is really asking for, and it is the step a worked example tends to do silently.

Every solution below follows the same order: the knowns, the principle and its condition, the algebra, then a check on sign and size. Take g = 9.8 m/s² throughout, NIST’s standard gravity of 9.80665 m/s² rounded to two figures.

Problem 1: how hard does a braking car decelerate?

A car traveling at 25 m/s brakes to a stop over 50 m. Assuming constant deceleration, what is its acceleration, and how long does it take to stop?

Knowns. v₀ = 25 m/s, v = 0, x - x₀ = 50 m. Unknowns: a and t.

Principle and condition. The kinematics equations need constant acceleration over the whole interval, which the problem grants. OpenStax notes that real braking is often close enough to constant, or can be split into parts that are. Time is unknown, so start with the equation that does not contain it: v² = v₀² + 2a(x - x₀).

Algebra.

0 = (25 m/s)² + 2a(50 m)

a = -(625 m²/s²) / (100 m) = -6.25 m/s²

Then v = v₀ + at gives t = (0 - 25 m/s) / (-6.25 m/s²) = 4.0 s.

Check. The acceleration is negative because it opposes the positive velocity, as it must for a car slowing down. And the fourth kinematics equation confirms the pair: x - x₀ = ½(v₀ + v)t = ½ × (25 m/s + 0) × 4.0 s = 50 m.

Problem 2: what is the tension in an Atwood machine?

Masses of 3.0 kg and 5.0 kg hang on either side of a light, frictionless pulley, connected by a light string. Find the acceleration of the masses and the tension in the string.

Knowns. m₁ = 3.0 kg, m₂ = 5.0 kg, ideal string and pulley. Unknowns: a and T.

Principle and condition. Newton’s second law, applied to each mass on its own diagram. The ideal string means the tension is the same on both sides and both masses share one acceleration magnitude. OpenStax presents this setup, the Atwood machine, as a classic problem for understanding connected objects. Draw the two free body diagrams first: each mass has tension up and its weight down. The heavier mass accelerates down, so take the positive direction as up for m₁ and down for m₂.

Algebra.

m₁: T - m₁g = m₁a

m₂: m₂g - T = m₂a

Adding the two equations eliminates T:

(m₂ - m₁)g = (m₁ + m₂)a

a = (5.0 - 3.0) kg × 9.8 m/s² / (8.0 kg) = 19.6 N / 8.0 kg = 2.45 m/s², or 2.5 m/s².

Then T = m₁(g + a) = 3.0 kg × (9.8 + 2.45) m/s² = 3.0 kg × 12.25 m/s² = 36.75 N, or 37 N.

Check. Use the other equation: T = m₂(g - a) = 5.0 kg × 7.35 m/s² = 36.75 N. Same value. The tension also lands between the two weights, 29.4 N and 49.0 N, which it must: it has to exceed the lighter weight to lift it and fall short of the heavier weight to let it drop. The tension formula page has the general form.

Problem 3: how fast is a cart at the bottom of a track?

A 0.50 kg cart is released from rest at the top of a frictionless track, 1.8 m above the bottom. How fast is it moving at the bottom?

Knowns. m = 0.50 kg, v₀ = 0, drop in height h = 1.8 m. Unknown: v.

Principle and condition. Conservation of mechanical energy, which OpenStax states holds when only conservative forces do work. Gravity is conservative. The normal force from the track does no work because it is always perpendicular to the motion. Friction would break the condition, and the problem removes it. The shape of the track does not matter, which is exactly why energy beats kinematics here: the acceleration changes all along a curved track, so the kinematics equations are not allowed.

Algebra.

mgh = ½mv²

v = √(2gh) = √(2 × 9.8 m/s² × 1.8 m) = √(35.28 m²/s²) = 5.94 m/s, or 5.9 m/s.

Check. The mass cancelled, so a heavier cart would reach the same speed, which is what frictionless energy conservation predicts. The work-energy theorem gives the same result from the other direction: gravity does work mgh, and that equals the gain in kinetic energy.

Problem 4: how much kinetic energy is lost when two cars stick together?

A 1200 kg car moving at 15 m/s hits a stationary 1800 kg car, and the two move off locked together. Find their speed just after the collision and the kinetic energy lost.

Knowns. m₁ = 1200 kg, v₁ = 15 m/s, m₂ = 1800 kg, v₂ = 0. Unknowns: v’ and ΔK.

Principle and condition. Conservation of momentum, which holds when the net external force on the two-car system is negligible during the collision. Road friction is small compared with the collision forces over that brief interval, so the condition holds for “just after.” Kinetic energy is not conserved: OpenStax calls a collision where the objects stick together perfectly inelastic, and it is the case with the maximum loss of kinetic energy.

Algebra.

m₁v₁ + m₂v₂ = (m₁ + m₂)v’

v’ = (1200 kg × 15 m/s) / (3000 kg) = 18,000 kg·m/s / 3000 kg = 6.0 m/s

K before = ½ × 1200 kg × (15 m/s)² = 135,000 J

K after = ½ × 3000 kg × (6.0 m/s)² = 54,000 J

ΔK = 54,000 J - 135,000 J = -81,000 J

Check. The system keeps 54,000 / 135,000 = 0.40 of its kinetic energy, and for one object hitting a stationary one and sticking, that fraction should equal m₁/(m₁ + m₂) = 1200/3000 = 0.40. It does. The missing 81,000 J went into crumpling metal, heat and sound.

This is the case students most often mishandle, by conserving kinetic energy instead of momentum. The test is simple: if the objects stick, kinetic energy is definitely not conserved.

Problem 5: how fast can a car take a flat curve?

A car rounds a flat, unbanked curve of radius 50 m. The coefficient of static friction between tires and road is 0.60. What is the maximum speed before the car slides?

Knowns. r = 50 m, μ_s = 0.60, flat road. Unknown: v_max.

Principle and condition. Newton’s second law in the radial direction. On a flat road the only horizontal force is static friction, so friction alone supplies the inward force m·v²/r. OpenStax uses this exact situation to show that the centripetal force on a turning car comes from friction between tires and road. Static friction can grow only up to μ_s·N, and the maximum speed is where it hits that limit. Vertically nothing accelerates, so N = mg.

Algebra.

μ_s·mg = m·v²/r

v_max = √(μ_s·g·r) = √(0.60 × 9.8 m/s² × 50 m) = √(294 m²/s²) = 17.1 m/s, or 17 m/s.

Check. The mass cancels again, so a truck and a hatchback on the same tires and road have the same limit. And 17 m/s is about 62 km/h, a plausible cautious speed for a tight curve on dry pavement. The centripetal force page covers the banked version.

What do the five have in common?

The principle was chosen before any equation was written, and the choice came from the condition. Problem 1 had constant acceleration, so kinematics, the study of motion without its causes. Problem 3 had changing acceleration but no friction, so energy. Problem 4 had a collision, so momentum, with energy explicitly ruled out. That is the pattern the problem-solving method is built around, and it is why the physics formula sheet attaches a condition to every entry.

If your own assignment has a problem that does not look like any of these, work it the same way and see which step stalls. Electra takes a photo of the problem, names the principle and why its condition holds, and shows the algebra line by line, so you can see the exact step where your attempt diverged instead of only comparing final answers.

Sources