The study of motion is called kinematics. In physics, it describes how an object moves, using position, displacement, velocity and acceleration, without asking what causes the motion. The causes, meaning forces, belong to dynamics. Kinematics answers “how does it move?” and dynamics answers “why does it move that way?”
That one-line answer is right, and it is also where most explanations stop. The split is more useful than a definition. It is the first decision in any mechanics problem, because the question being asked tells you which half of the subject you are in, and that tells you which relationships are even allowed.
What is the study of motion called?
Kinematics. OpenStax’s College Physics defines it as the study of motion without considering its causes, and notes that the word comes from a Greek term meaning motion, the same root as “cinema.” OpenStax’s University Physics frames the subject as two disciplines: kinematics, which describes motion, and dynamics, which is concerned with its causes.
The College Physics introduction to Newton’s laws draws the boundary in one sentence that is worth remembering: the study of motion is kinematics, but kinematics only describes the way objects move, their velocity and their acceleration. Dynamics considers the forces, and Newton’s laws are its foundation.
What does kinematics actually describe?
Four quantities, each built from the one before.
Position is where the object is, measured from an origin you choose. It has a sign, and the sign depends only on that choice.
Displacement is the change in position, Δx = x_f - x₀, final minus initial. It has a direction.
Velocity is how fast the position changes, and in which direction. Average velocity is displacement divided by elapsed time.
Acceleration is how fast the velocity changes. OpenStax defines average acceleration as the rate at which velocity changes, ā = Δv/Δt, with SI units of m/s².
That is the whole descriptive vocabulary. Everything in a kinematics chapter, including the kinematics equations and projectile motion, is these four quantities related to each other and to time.
Why is displacement not the same as distance?
Because displacement only cares where you started and where you ended. OpenStax’s example is a professor who paces back and forth for a total of 150 m and ends up 2.0 m to the right of where she began: her displacement is +2.0 m, while the distance she traveled is 150 m. It adds that kinematics nearly always works with displacement and almost never with distance traveled.
The difference carries straight into speed and velocity. Suppose a student walks 150 m east, then turns and walks 50 m west, taking 100 s in total. Take east as positive.
Distance traveled = 150 m + 50 m = 200 m, so average speed = 200 m / 100 s = 2.0 m/s.
Displacement = +150 m - 50 m = +100 m, so average velocity = +100 m / 100 s = +1.0 m/s, or 1.0 m/s east.
Same walk, two different answers, both correct for the question they answer. A runner who completes one lap of a 400 m track in 80 s has an average speed of 400 m / 80 s = 5.0 m/s and an average velocity of zero, because the displacement is zero. When a problem says “velocity,” use displacement. The full comparison, with the problems where the distinction changes the answer, is in speed vs velocity.
Which way does acceleration point?
In the direction of the change in velocity, which is not always the direction of motion. OpenStax says this directly: when an object slows down, its acceleration is opposite to its direction of motion. A subway train coming into a station is accelerating backward while it moves forward.
A number shows it. A car moving at +20 m/s slows to +8.0 m/s in 4.0 s. Then a = (8.0 m/s - 20 m/s) / 4.0 s = -12 m/s / 4.0 s = -3.0 m/s². The velocity is positive the whole time. The acceleration is negative. There is nothing contradictory about that, and the sign is exactly what the kinematics equations need. Most sign errors in a first course come from assuming the two must match.
What does kinematics leave out?
The reason. Kinematics can tell you that a car went from rest to 20 m/s in 8.0 s. It cannot tell you what it took to do that, because it has no concept of mass or force. That is the job of dynamics, and specifically of Newton’s second law.
The same situation shows the split. A 1500 kg car accelerates uniformly from rest to 20 m/s in 8.0 s.
“How far does it travel?” is a kinematics question. Constant acceleration is given, so the kinematics equations apply: x - x₀ = ½(v₀ + v)t = ½ × (0 + 20 m/s) × 8.0 s = 80 m. The mass never appears.
“What net force acts on it?” is a dynamics question. First the acceleration, still from kinematics: a = (20 m/s - 0) / 8.0 s = 2.5 m/s². Then the force: ΣF = ma = 1500 kg × 2.5 m/s² = 3750 N, or about 3.8 kN. Now the mass is essential.
Notice that the dynamics answer needed a kinematics step first. That is typical: kinematics is the language, and dynamics uses it.
How does this split help on a real problem?
Read the question before the setup. If it asks for a position, a time, a speed or an acceleration, and gives you enough motion data, you may be able to stay entirely in kinematics. If it asks for a force, a mass, a tension or a coefficient of friction, or gives you forces and asks about motion, you are in dynamics, and the first step is a free body diagram.
Then check the condition that kinematics needs. The kinematics equations require constant acceleration over the whole interval. If the acceleration changes, you either split the motion into pieces where it is constant or switch to a principle that does not need it, which is usually energy. The practice problems post has a worked case of each: a braking car where kinematics is allowed, and a cart on a curved track where it is not.
Where does kinematics show up later?
In nearly every unit, as the descriptive layer underneath. Projectile motion is kinematics done twice, once horizontally and once vertically, sharing only the time. Circular motion introduces an acceleration, v²/r, that points toward the center even at constant speed, which is kinematics again. Rotation reuses the same four descriptors with angles in place of positions: angular position, angular displacement, angular velocity and angular acceleration.
If a particular problem keeps stalling at the point of choosing between kinematics and dynamics, that is a good one to bring to Electra. Photograph it, and it names which kind of question you are answering and why, then works the relationships through line by line so you can see where the choice was made.
What is the one thing to take from this?
Ask “how” or “why” before you write anything. How it moves is kinematics: four descriptors and time. Why it moves that way is dynamics: forces, mass and Newton’s laws. Most problems in a first course use both, in that order. The problem-solving method builds the choice into its first steps, and the formula pages mark which relationships belong to which half.
Sources
- Chapter 3 Introduction, Motion Along a Straight Line, OpenStax University Physics Volume 1
- Introduction to One-Dimensional Kinematics, OpenStax College Physics 2e
- Introduction to Dynamics: Newton's Laws of Motion, OpenStax College Physics 2e
- 2.1 Displacement, OpenStax College Physics 2e
- 3.3 Average and Instantaneous Acceleration, OpenStax University Physics Volume 1