A closed paper booklet and a clear pencil case on a school desk beside a window, in early morning light

The AP Physics 1 formula sheet is a three-page reference booklet the College Board hands out with the exam: constants, prefixes, a trigonometry table, geometry, and one dense page of mechanics and fluids equations. It lists the relationships. It never says when each one is allowed, and a few standard results are missing entirely.

That second sentence is the reason to study the sheet rather than just glance at it. Nothing on it is wrong, but every line on it is a compressed statement with a condition hidden behind it, and the exam is largely a test of whether you can recover the condition. Knowing what the sheet leaves out tells you exactly what you still have to carry in your head.

This post walks through the 2026 version section by section, in the order it is printed.

What is on the AP Physics 1 formula sheet?

Two pages of content behind a cover. The first page is the table of information: constants and conversion factors, metric prefixes from tera to pico, unit symbols, a table of trig values for common angles, four conventions the exam assumes, and the geometry of rectangles, triangles, circles, cylinders and spheres. The second page is a single block headed Mechanics and Fluids, with a variable key for every symbol. The cover notes that you can use blank space for scratch work and that proctors collect the booklet at the end.

The four conventions deserve more attention than they get. Unless a problem says otherwise, the frame of reference is inertial, air resistance is negligible, springs and strings are ideal, and fluids are ideal with pipes completely filled. Those four sentences are the only conditions printed anywhere in the booklet, and they apply to every problem on the exam.

Which constants does it give, and how precise are they?

Three, all rounded for exam arithmetic. The sheet gives G = 6.67 × 10⁻¹¹ N·m²/kg², 1 atm = 1.0 × 10⁵ Pa, and g = 9.8 m/s², also written as 9.8 N/kg for the gravitational field strength at Earth’s surface.

Compare those with NIST’s CODATA 2022 values. Standard gravity is exactly 9.80665 m/s², the gravitational constant is 6.67430 × 10⁻¹¹ m³/(kg·s²), and the standard atmosphere is exactly 101,325 Pa. The sheet’s g differs from standard gravity by 0.00665 / 9.80665 = 0.068 percent, which is invisible at two or three significant figures. The atmosphere is the one to watch: 1.0 × 10⁵ Pa is about 1.3 percent below 101,325 Pa, so use the sheet’s value on the exam and NIST’s anywhere precision matters.

The two ways of writing g are worth a second look. The m/s² version is an acceleration, the N/kg version is a field strength, and they are numerically identical because 1 N/kg = 1 (kg·m/s²)/kg = 1 m/s². The sheet prints both to remind you that weight is a force, w = mg, and not a kind of acceleration.

Why does the trig table include 37 and 53 degrees?

Because those two angles belong to the 3-4-5 right triangle, and the sheet gives their values as exact fractions: sin 37° = 3/5, cos 37° = 4/5, tan 37° = 3/4, and the reverse for 53°. Problems written around those angles can be solved without a calculator.

A block sliding down a frictionless 37° incline shows how it is meant to be used. The condition first: no friction, so the only force along the slope is the component of gravity, and Newton’s second law along that axis gives a = g·sin θ. Then a = 9.8 m/s² × 3/5 = 5.88 m/s², or 5.9 m/s² to two significant figures. The fractions are rounded; sin 37° is really 0.6018, which is why exam answers built on this triangle are quoted to two figures.

What does the mechanics column actually say?

Most of the course, one line each. Reading down the first column: the kinematics equations for one axis, center of mass, a_sys = ΣF/m_sys for Newton’s second law, universal gravitation, friction, the spring force F_s = -kΔx, centripetal acceleration a_c = v²/r, kinetic energy, work, gravitational and spring potential energy, power, momentum, and impulse as J = F_avg·Δt = Δp.

Three of those lines hide the condition that matters most.

The kinematics lines need constant acceleration. The sheet writes v_x = v_x0 + a_x·t with a subscript x and nothing else. The requirement that a_x stay constant over the whole interval is not printed anywhere, and it is the requirement that fails most often.

The friction line is an inequality. It reads |F_f| ≤ |μF_N|, not an equals sign. Static friction takes whatever value is needed to prevent slipping, up to a maximum of μ_s·F_N. It equals μF_N only for kinetic friction or at the point of slipping. Writing F_f = μF_N for a block at rest is one of the most common ways to get a static problem wrong.

Centripetal acceleration is not a force. The sheet gives a_c = v²/r and no separate centripetal force. That matches the physics: in a circle, the net inward force from real forces (tension, gravity, friction, normal force) supplies m·v²/r. The centripetal force page works this out, and the short version is that “centripetal force” never gets its own arrow on a diagram.

What is missing from the sheet?

Four things that students expect to find and do not.

The fourth kinematics equation. The sheet prints three: velocity-time, position-time and velocity-position. The equation x = x₀ + ½(v₀ + v)t, the one that skips acceleration, is not there. It is short to rebuild from the first two, and it is the fastest route whenever a problem gives you both speeds and the time but not a.

Speed from the period. There is no v = 2πr/T. You build it from two lines that are printed. OpenStax defines angular frequency as ω = 2π/T, and the sheet gives v = rω, so v = 2πr/T. For a ball on a string moving in a circle of radius 0.50 m with period 2.0 s, v = 2π × 0.50 m / 2.0 s = 1.57 m/s, or 1.6 m/s to two significant figures.

The conservation statements. The sheet gives the pieces (K, U_g, U_s, p) but never writes “total mechanical energy is constant when only conservative forces do work” or “total momentum is constant when the net external force is zero.” Those sentences are the conditions, and they are the part of the problem that earns the setup marks.

Any condition at all on fluids beyond one sentence. Bernoulli’s equation appears in full, P₁ + ρgy₁ + ½ρv₁² = P₂ + ρgy₂ + ½ρv₂², and the only warning is the convention on page one that fluids are ideal and pipes completely filled unless stated. The Bernoulli’s equation page spells out what “ideal” requires.

How should you read the fluids lines?

With the density and the volume assigned to the right thing. The buoyancy line is F_b = ρVg, and both ρ and V refer to the fluid displaced, not the object. OpenStax states Archimedes’ principle as the buoyant force equaling the weight of the fluid the object displaces, and a floating object sits with a submerged fraction equal to ρ_object / ρ_fluid.

So a wooden block of average density 600 kg/m³ floating in fresh water at 1000 kg/m³ sits with 600 / 1000 = 0.600 of its volume below the waterline. Put the block’s density into F_b = ρVg and the answer comes out as the block’s own weight regardless of how deep it sits, which is circular and tells you nothing.

The other fluid lines follow the same pattern. P = P₀ + ρgh is the pressure at depth in a fluid of constant density, P_gauge = ρgh is the same thing minus the surface pressure, and A₁v₁ = A₂v₂ is continuity for an incompressible fluid filling the pipe.

What about the rotation and oscillation lines?

The right-hand column mirrors the left. Rotational kinematics appears with ω and α in place of v and a, torque as τ = r⊥F = rF·sin θ (torque), rotational inertia as I = Σmr² with the parallel-axis form I’ = I_cm + Md² (moment of inertia), rotational kinetic energy, and angular momentum in both the L = Iω and L = rmv·sin θ forms.

The oscillation lines give the spring period T_s = 2π√(m/k) and the pendulum period T_p = 2π√(ℓ/g). The pendulum formula carries the sheet’s quietest condition: it holds only for small angles. OpenStax puts the working limit at a deflection under about 15°, where the approximation sin θ ≈ θ is off by less than 1 percent. Within that limit the period does not depend on the mass or the amplitude, which is why neither appears in the formula. The spring formula has no angle to worry about; it needs only the ideal spring the sheet’s conventions already assume.

How do you use the sheet while you study?

Treat it as the list of things you must be able to attach a condition to. Go down the equation page and, for each line, say out loud when it applies and what it would mean for that condition to fail. The lines you cannot do that for are the ones to study. The physics formula sheet on this site does exactly this for the broader first-year set, and the study habits post covers the daily routine that makes the conditions stick.

On an actual problem, the sheet comes late. Name the principle first, check its condition, and only then look up the line. The problem-solving method puts the equation fourth for this reason.

This is also where a tutor is quicker than rereading the sheet. Electra keeps the formulas with their conditions attached, and when you photograph a problem you are stuck on, it names which line of the sheet applies, checks that the condition holds, and shows the algebra step by step so you can see where your own attempt went off. Every step is shown so you can check it rather than take it on trust.

The full set, each with its variables, conditions and a worked example, is on the physics formulas page.

Sources